[bit_flipper]

Code: Select all

/sbin/start_udev Line 292   1255 segmentation fault /sbin/udevadm trigger  [FAILED]

Code: Select all

starting atd   [FAILED]

Media Check gives a PASS
LiveCD boots up to the desktop login screen, but I have a very dead mouse.

Options I am using:

Code: Select all

mklivecd --root=/ --tmp=/home --fstab=rw,noauto --ufs=unionfs --md5sum --nodir=^/home --nofile=^/var/cache/apt/archives/*.* /home/gorilla/remastered-pclos.iso

mklivecd worked perfectly using the above options with the previous kernel. The only option added to accomodate kernel 2.6.27.31.tex5 was:

Code: Select all

--ufs=unionfs

What is the fix for this?

[bit_flipper]

LiveCD works fine in VirtualBox, but refuses to work on the actual hardware.

[bit_flipper]

What are those kernel
"BUG: unable to handle kernel paging request at f8e9a300" and
"Oops" messages?

Code: Select all

Linux version 2.6.27.31.tex5 (root@localhost) (gcc version 4.1.1 20060724 (prerelease) (4.1.1-4pclos2007)) #1 SMP Fri Sep 11 14:35:27 CDT 2009
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007dee0000 (usable)
 BIOS-e820: 000000007dee0000 - 000000007dee3000 (ACPI NVS)
 BIOS-e820: 000000007dee3000 - 000000007def0000 (ACPI data)
 BIOS-e820: 000000007def0000 - 000000007df00000 (reserved)
 BIOS-e820: 000000007e000000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Malformed early option 'acpi'
DMI 2.4 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x7dee0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 38000000 @ 10000-15000
RAMDISK: 7d840000 - 7debe111
Allocated new RAMDISK: 005c7000 - 00c45111
Move RAMDISK from 000000007d840000 - 000000007debe110 to 005c7000 - 00c45110
ACPI: RSDP 000F7530, 0024 (r2 Nvidia)
ACPI: XSDT 7DEE3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
ACPI: FACP 7DEE9C80, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
ACPI: DSDT 7DEE3280, 69B6 (r1 NVIDIA ASUSACPI     1000 MSFT  3000000)
ACPI: FACS 7DEE0000, 0040
ACPI: SSDT 7DEE9E80, 01C4 (r1 PTLTD  POWERNOW        1  LTP        1)
ACPI: HPET 7DEEA0C0, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
ACPI: MCFG 7DEEA140, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
ACPI: APIC 7DEE9DC0, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
1118MB HIGHMEM available.
896MB LOWMEM available.
  mapped low ram: 0 - 38000000
  low ram: 00000000 - 38000000
  bootmap 00011000 - 00018000
(9 early reservations) ==> bootmem [0000000000 - 0038000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 00005c34c0]    TEXT DATA BSS ==> [0000100000 - 00005c34c0]
  #4 [00005c4000 - 00005c7000]    INIT_PG_TABLE ==> [00005c4000 - 00005c7000]
  #5 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
  #7 [00005c7000 - 0000c45111]      NEW RAMDISK ==> [00005c7000 - 0000c45111]
  #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00f5980] 000f5980
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x00038000
  HighMem  0x00038000 -> 0x0007dee0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007dee0
On node 0 totalpages: 515695
free_area_init_node: node 0, pgdat c04c6000, node_mem_map c1000200
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 284194 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x10de8201 base: 0xfefff000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
PERCPU: Allocating 40988 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 511665
Kernel command line: livecd=livecd initrd=initrd.gz root=/dev/rd/3 acpi=on vga=788 keyb=us splash=silent fstab=rw,noauto noscsi BOOT_IMAGE=vmlinuz automatic=method:cdrom vga=788
bootsplash: silent mode.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 2004.141 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2033220k/2063232k available (2682k kernel code, 28612k reserved, 1272k data, 376k init, 1145728k highmem)
virtual kernel memory layout:
    fixmap  : 0xffe18000 - 0xfffff000   (1948 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc04e4000 - 0xc0542000   ( 376 kB)
      .data : 0xc039e8b3 - 0xc04dca80   (1272 kB)
      .text : 0xc0100000 - 0xc039e8b3   (2682 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 4008.28 BogoMIPS (lpj=2004141)
Security Framework initialized
AppArmor: AppArmor disabled by boottime parameter
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
Early unpacking initramfs...<6>ACPI: Core revision 20080609
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4008.06 BogoMIPS (lpj=2004033)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Brought up 2 CPUs
Total of 2 processors activated (8016.34 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level CPU
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level CPU
  groups: 1 0
net_namespace: 840 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:05.0 reg 10 32bit mmio: [fc000000, fcffffff]
PCI: 0000:00:05.0 reg 14 64bit mmio: [d0000000, dfffffff]
PCI: 0000:00:05.0 reg 1c 64bit mmio: [fb000000, fbffffff]
PCI: 0000:00:05.0 reg 30 32bit mmio: [0, 1ffff]
PCI: 0000:00:0a.1 reg 20 io port: [4c00, 4c3f]
PCI: 0000:00:0a.1 reg 24 io port: [4c40, 4c7f]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.1: PME# disabled
PCI: 0000:00:0b.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
pci 0000:00:0b.0: supports D1
pci 0000:00:0b.0: supports D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
PCI: 0000:00:0b.1 reg 10 32bit mmio: [fe02e000, fe02e0ff]
pci 0000:00:0b.1: supports D1
pci 0000:00:0b.1: supports D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: PME# disabled
PCI: 0000:00:0d.0 reg 20 io port: [f400, f40f]
PCI: 0000:00:0e.0 reg 10 io port: [9f0, 9f7]
PCI: 0000:00:0e.0 reg 14 io port: [bf0, bf3]
PCI: 0000:00:0e.0 reg 18 io port: [970, 977]
PCI: 0000:00:0e.0 reg 1c io port: [b70, b73]
PCI: 0000:00:0e.0 reg 20 io port: [e000, e00f]
PCI: 0000:00:0e.0 reg 24 32bit mmio: [fe02d000, fe02dfff]
PCI: 0000:00:0f.0 reg 10 io port: [9e0, 9e7]
PCI: 0000:00:0f.0 reg 14 io port: [be0, be3]
PCI: 0000:00:0f.0 reg 18 io port: [960, 967]
PCI: 0000:00:0f.0 reg 1c io port: [b60, b63]
PCI: 0000:00:0f.0 reg 20 io port: [cc00, cc0f]
PCI: 0000:00:0f.0 reg 24 32bit mmio: [fe02c000, fe02cfff]
PCI: 0000:00:10.1 reg 10 32bit mmio: [fe024000, fe027fff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:10.1: PME# disabled
PCI: 0000:00:14.0 reg 10 32bit mmio: [fe02b000, fe02bfff]
PCI: 0000:00:14.0 reg 14 io port: [c800, c807]
pci 0000:00:14.0: supports D1
pci 0000:00:14.0: supports D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: PME# disabled
PCI: 0000:01:05.0 reg 10 32bit mmio: [fddff000, fddff7ff]
PCI: 0000:01:05.0 reg 14 32bit mmio: [fddf8000, fddfbfff]
pci 0000:01:05.0: supports D1
pci 0000:01:05.0: supports D2
pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:05.0: PME# disabled
pci 0000:00:10.0: transparent bridge
PCI: bridge 0000:00:10.0 io port: [b000, bfff]
PCI: bridge 0000:00:10.0 32bit mmio: [fdd00000, fddfffff]
PCI: bridge 0000:00:10.0 32bit mmio pref: [fde00000, fdefffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
system 00:01: ioport range 0x4000-0x407f has been reserved
system 00:01: ioport range 0x4080-0x40ff has been reserved
system 00:01: ioport range 0x4400-0x447f has been reserved
system 00:01: ioport range 0x4480-0x44ff has been reserved
system 00:01: ioport range 0x4800-0x487f has been reserved
system 00:01: ioport range 0x4880-0x48ff has been reserved
system 00:01: ioport range 0x2000-0x207f has been reserved
system 00:01: ioport range 0x2080-0x20ff has been reserved
system 00:01: iomem range 0x7e000000-0x7fffffff could not be reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x87f has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:0e: iomem range 0xcec00-0xcffff has been reserved
system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
system 00:0e: iomem range 0xfefff000-0xfefff0ff could not be reserved
system 00:0e: iomem range 0x7dee0000-0x7defffff could not be reserved
system 00:0e: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0x100000-0x7dedffff could not be reserved
system 00:0e: iomem range 0x7def0000-0x7feeffff could not be reserved
system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved
system 00:0e: iomem range 0xfff80000-0xfff80fff could not be reserved
system 00:0e: iomem range 0xfff90000-0xfffbffff could not be reserved
system 00:0e: iomem range 0xfffed000-0xfffeffff could not be reserved
Switched to high resolution mode on CPU 1
pci 0000:00:10.0: PCI bridge, secondary bus 0000:01
pci 0000:00:10.0:   IO window: 0xb000-0xbfff
pci 0000:00:10.0:   MEM window: 0xfdd00000-0xfddfffff
pci 0000:00:10.0:   PREFETCH window: 0x000000fde00000-0x000000fdefffff
pci 0000:00:10.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [b000, bfff]
bus: 01 index 1 mmio: [fdd00000, fddfffff]
bus: 01 index 2 mmio: [fde00000, fdefffff]
bus: 01 index 3 io port: [0, ffff]
bus: 01 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 6648k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1256972057.785:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1748
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Enabling HT MSI Mapping
pci 0000:00:05.0: Boot video device
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI Mapping
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 32768k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:d210
vesafb: pmi: set display start = c00cd246, set palette = c00cd2b0
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash: scanning last 2MB of initrd for signature
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 145937 bytes
bootsplash: ...found (800x600, 145889 bytes, v3).
Console: switching to colour frame buffer device 92x32
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfefff000 is busy
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver
amd74xx 0000:00:0d.0: UDMA133 controller
amd74xx 0000:00:0d.0: IDE controller (0x10de:0x0265 rev 0xa1)
amd74xx 0000:00:0d.0: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf400-0xf407
    ide1: BM-DMA at 0xf408-0xf40f
Probing IDE interface ide0...
hda: TSSTcorpCD/DVDW SH-S182M, ATAPI CD/DVD-ROM drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
registered taskstats version 1
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
input: PS/2 Generic Mouse as /class/input/input1
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT4-fs warning (device ram0): ext4_fill_super: extents feature not enabled on this filesystem, use tune2fs.

EXT4-fs: Update your userspace programs to mount using ext4
EXT4-fs: ext4dev backwards compatibility will go away by 2.6.31
EXT4-fs warning (device ram0): ext4_fill_super: extents feature not enabled on this filesystem, use tune2fs.

VFS: Mounted root (ext2 filesystem).
NTFS driver 2.1.29 [Flags: R/O MODULE].
hda: ATAPI 94X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
squashfs: version 3.3-CVS (2008/06/12) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
loop: module loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.31.tex5 ohci_hcd
usb usb1: SerialNumber: 0000:00:0b.0
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe02e000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.31.tex5 ehci_hcd
usb usb2: SerialNumber: 0000:00:0b.1
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
cdrom: hda: mrw address space DMA selected
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Registering unionfs 1.4
unionfs: debugging is not enabled
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
forcedeth 0000:00:14.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:60:0b:11:92
forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Linux agpgart interface v0.103
No dock devices found.
libata version 3.00 loaded.
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 20
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 20
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD5000AAKS-65YGA0, 12.01C02, max UDMA/133
ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-6 12.0 PQ: 0 ANSI: 5
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:0f.0: Using SWNCQ mode
sata_nv 0000:00:0f.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 23
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 23
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
 sdb1: <bsd: sdb5 sdb6 sdb7 sdb8 sdb9 >
sd 1:0:0:0: [sdb] Attached SCSI disk
processor ACPI0007:00: registered as cooling_device0
processor ACPI0007:01: registered as cooling_device1
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0xc (2000 MHz), vid 0xc
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xe
powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
udevd version 128 started
BUG: unable to handle kernel paging request at f8e9a300
IP: [<c02c65c3>] driver_uevent_store+0x23/0x40
*pde = 37b58067 *pte = 00000000
Oops: 0000 [#1] SMP
Modules linked in: cpufreq_ondemand cpufreq_conservative cpufreq_powersave powernow_k8 freq_table processor pata_amd sd_mod crc_t10dif sata_nv libata dock agpgart usbhid ff_memless forcedeth unionfs usb_storage scsi_mod ehci_hcd ohci_hcd uhci_hcd usbcore paride parport loop squashfs sqlzma unlzma ide_cd_mod cdrom isofs nls_utf8 ntfs vfat msdos fat reiserfs ext3 jbd nls_cp437 nls_iso8859_2 nls_iso8859_1 zlib_deflate

Pid: 1255, comm: udevadm Not tainted (2.6.27.31.tex5 #1)
EIP: 0060:[<c02c65c3>] EFLAGS: 00010246 CPU: 1
EIP is at driver_uevent_store+0x23/0x40
EAX: 00000000 EBX: 00000003 ECX: ffffffff EDX: 00000000
ESI: f8e9a2d4 EDI: f6114000 EBP: f60fbf28 ESP: f60fbf1c
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process udevadm (pid: 1255, ti=f60fa000 task=f7babd90 task.ti=f60fa000)
Stack: 00000000 c02c65a0 f7907660 f60fbf3c c02c644b c04bce44 f6024840 00000003
       f60fbf6c c01e077d 00000003 00000003 0805d643 f60a0000 f6014c94 c04bce44
       f7907660 f60a0000 0805d643 00000003 f60fbf90 c0197746 f60fbf9c c0195856
Call Trace:
 [<c02c65a0>] ? driver_uevent_store+0x0/0x40
 [<c02c644b>] ? drv_attr_store+0x2b/0x40
 [<c01e077d>] ? sysfs_write_file+0x9d/0xf0
 [<c0197746>] ? vfs_write+0x96/0x160
 [<c0195856>] ? do_sys_open+0xb6/0xe0
 [<c01e06e0>] ? sysfs_write_file+0x0/0xf0
 [<c0197f8d>] ? sys_write+0x3d/0x70
 [<c0103d2b>] ? sysenter_do_call+0x12/0x2f
 =======================
Code: 5d c3 8d b6 00 00 00 00 55 89 e5 83 ec 0c 89 5d f8 89 cb 89 75 fc 8d 4d f4 89 c6 89 d0 89 da e8 14 7d f8 ff 85 c0 75 0b 8b 55 f4 <8b> 46 2c e8 f5 7c f8 ff 89 d8 8b 75 fc 8b 5d f8 89 ec 5d c3 89
EIP: [<c02c65c3>] driver_uevent_store+0x23/0x40 SS:ESP 0068:f60fbf1c
---[ end trace 7e27cf7f8c5c56ee ]---
floppy0: no floppy controllers found
Linux video capture interface: v2.00
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ohci1394 0000:01:05.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fddff000-fddff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Non-volatile memory driver v1.2
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
IT8716 SuperIO detected.
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
ppdev: user-space parallel port driver
BUG: unable to handle kernel paging request at f8e9a300
IP: [<c02c78c1>] put_driver+0x1/0x10
*pde = 37b58067 *pte = 00000000
Oops: 0000 [#2] SMP
Modules linked in: amd64_agp(+) parport_pc ppdev evdev tifm_7xx1 tifm_core sdhci nvram mmc_block mmc_core sbp2 ohci1394 ieee1394 pata_jmicron ahci ata_piix ata_generic bttv videodev v4l1_compat ir_common compat_ioctl32 i2c_algo_bit v4l2_common videobuf_dma_sg videobuf_core btcx_risc tveeprom i2c_core yenta_socket rsrc_nonstatic pcmcia_core cpufreq_ondemand cpufreq_conservative cpufreq_powersave powernow_k8 freq_table processor pata_amd sd_mod crc_t10dif sata_nv libata dock agpgart usbhid ff_memless forcedeth unionfs usb_storage scsi_mod ehci_hcd ohci_hcd uhci_hcd usbcore paride parport loop squashfs sqlzma unlzma ide_cd_mod cdrom isofs nls_utf8 ntfs vfat msdos fat reiserfs ext3 jbd nls_cp437 nls_iso8859_2 nls_iso8859_1 zlib_deflate

Pid: 1517, comm: modprobe Tainted: G      D   (2.6.27.31.tex5 #1)
EIP: 0060:[<c02c78c1>] EFLAGS: 00010286 CPU: 1
EIP is at put_driver+0x1/0x10
EAX: f8e9a2d4 EBX: 00000000 ECX: f908d3b0 EDX: f8e9a2d4
ESI: f908e2d4 EDI: c0260360 EBP: f6193ef8 ESP: f6193ed4
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process modprobe (pid: 1517, ti=f6192000 task=f61d8000 task.ti=f6192000)
Stack: f6193ef8 c02c79bd f6193ed8 000016cc 00000000 f6193f54 f908e2a0 f8e1a000
       f908e2d4 f6193f0c c02605aa f908e580 f8e1a000 00000000 f6193f1c f8e1a034
       00000000 f908e580 f6193f8c c010111a 00000000 00004000 000004d8 f90bdf00
Call Trace:
 [<c02c79bd>] ? driver_register+0xed/0x120
 [<f8e1a000>] ? agp_amd64_init+0x0/0xcd [amd64_agp]
 [<c02605aa>] ? __pci_register_driver+0x4a/0x90
 [<f8e1a000>] ? agp_amd64_init+0x0/0xcd [amd64_agp]
 [<f8e1a034>] ? agp_amd64_init+0x34/0xcd [amd64_agp]
 [<c010111a>] ? do_one_initcall+0x2a/0x150
 [<c01974e0>] ? do_sync_read+0x0/0x110
 [<c0156533>] ? sys_init_module+0x83/0x1a0
 [<c0197ffd>] ? sys_read+0x3d/0x70
 [<c0103d2b>] ? sysenter_do_call+0x12/0x2f
 =======================
Code: 8b 46 2c e8 32 b0 f1 ff 8b 53 04 83 c3 04 85 d2 75 ee 89 f0 e8 61 ee ff ff 5b 5e 5d c3 8d b6 00 00 00 00 8d bc 27 00 00 00 00 55 <8b> 40 2c 89 e5 e8 95 5c f8 ff 5d c3 8d 76 00 55 89 e5 57 56 89
EIP: [<c02c78c1>] put_driver+0x1/0x10 SS:ESP 0068:f6193ed4
---[ end trace 7e27cf7f8c5c56ee ]---
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d8000167d9e2]
Adding 4088500k swap on /dev/sda5.  Priority:-1 extents:1 across:4088500k
Freeing unused kernel memory: 376k freed
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
fan PNP0C0B:00: registered as cooling_device2
ACPI: Fan [FAN] (on)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
ACPI: WMI: Mapper loaded
usbcore: registered new interface driver usblp
NET: Registered protocol family 17
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:10.1: setting latency timer to 64
process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=1 offMin=0xcd68 offMax=0xcd68
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.0.8_OSE (interface 0x000e0000).
fuse init (API version 7.9)
scsi4 : vhba
------------[ cut here ]------------
WARNING: at kernel/softirq.c:136 local_bh_enable_ip+0x78/0x90()
Modules linked in: vhba fuse vboxnetflt vboxdrv snd_hda_intel snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd af_packet soundcore usblp wmi video output thermal sbs sbshc pci_slot fan container button battery ac binfmt_misc dm_mod amd64_agp(+) parport_pc ppdev evdev tifm_7xx1 tifm_core sdhci nvram mmc_block mmc_core sbp2 ohci1394 ieee1394 pata_jmicron ahci ata_piix ata_generic bttv videodev v4l1_compat ir_common compat_ioctl32 i2c_algo_bit v4l2_common videobuf_dma_sg videobuf_core btcx_risc tveeprom i2c_core yenta_socket rsrc_nonstatic pcmcia_core cpufreq_ondemand cpufreq_conservative cpufreq_powersave powernow_k8 freq_table processor pata_amd sd_mod crc_t10dif sata_nv libata dock agpgart usbhid ff_memless forcedeth unionfs usb_storage scsi_mod ehci_hcd ohci_hcd uhci_hcd usbcore paride parport loop squashfs sqlzma unlzma ide_cd_mod cdrom isofs nls_utf8 ntfs vfat msdos fat reiserfs ext3 jbd nls_cp437 nls_iso8859_2 nls_iso8859_1 zlib_deflate
Pid: 7, comm: events/0 Tainted: G      D   2.6.27.31.tex5 #1
 [<c012ffd4>] warn_on_slowpath+0x54/0x70
 [<c017108e>] ? mempool_alloc_slab+0xe/0x10
 [<c0171191>] ? mempool_alloc+0x31/0xf0
 [<c02556e5>] ? __sg_alloc_table+0x55/0x100
 [<c039d7ef>] ? _spin_lock_irqsave+0x2f/0x40
 [<c0139b45>] ? lock_timer_base+0x25/0x50
 [<c01356c8>] local_bh_enable_ip+0x78/0x90
 [<c039d7b1>] _spin_unlock_bh+0x11/0x20
 [<f93b8116>] vhba_lookup_device+0x46/0x60 [vhba]
 [<f8e9d490>] ? scsi_done+0x0/0x20 [scsi_mod]
 [<f93b8c48>] vhba_queuecommand+0x18/0x190 [vhba]
 [<c039d7ef>] ? _spin_lock_irqsave+0x2f/0x40
 [<f8e9de8f>] scsi_dispatch_cmd+0xdf/0x2a0 [scsi_mod]
 [<c039d7ef>] ? _spin_lock_irqsave+0x2f/0x40
 [<f8ea3fd2>] scsi_request_fn+0x1f2/0x390 [scsi_mod]
 [<c023e35d>] __generic_unplug_device+0x1d/0x30
 [<c0241211>] blk_execute_rq_nowait+0x61/0xb0
 [<c02412be>] blk_execute_rq+0x5e/0xb0
 [<c0241180>] ? blk_end_sync_rq+0x0/0x30
 [<c01bd24d>] ? bio_alloc_bioset+0x5d/0x80
 [<c01bd874>] ? bio_add_pc_page+0x24/0x30
 [<c023d17a>] ? blk_rq_bio_prep+0x9a/0xb0
 [<f8ea3352>] scsi_execute+0xd2/0x120 [scsi_mod]
 [<f8ea340c>] scsi_execute_req+0x6c/0xd0 [scsi_mod]
 [<f8ea5a2e>] scsi_probe_and_add_lun+0x1ce/0xa90 [scsi_mod]
 [<c039c4db>] ? mutex_lock+0xb/0x20
 [<c02ca250>] ? transport_setup_classdev+0x0/0x30
 [<f8ea56e4>] ? scsi_alloc_target+0x1e4/0x270 [scsi_mod]
 [<f8ea63c1>] __scsi_add_device+0xd1/0xe0 [scsi_mod]
 [<f8ea63ea>] scsi_add_device+0x1a/0x30 [scsi_mod]
 [<f93b8e32>] vhba_scan_devices+0x72/0xa8 [vhba]
 [<c01403da>] run_workqueue+0x8a/0x120
 [<f93b8dc0>] ? vhba_scan_devices+0x0/0xa8 [vhba]
 [<c0140ea9>] worker_thread+0x99/0xf0
 [<c0143a90>] ? autoremove_wake_function+0x0/0x50
 [<c0140e10>] ? worker_thread+0x0/0xf0
 [<c0143712>] kthread+0x42/0x70
 [<c01436d0>] ? kthread+0x0/0x70
 [<c0104a4f>] kernel_thread_helper+0x7/0x18
 =======================
---[ end trace 7e27cf7f8c5c56ee ]---
scsi 4:0:0:0: CD-ROM            CDEmu    Virt. CD/DVD-ROM 1.10 PQ: 0 ANSI: 0
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
sr 4:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 4:0:0:0: Attached scsi generic sg2 type 5
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: ...found (800x600, 5400 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: ...found (800x600, 5400 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: ...found (800x600, 5400 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: ...found (800x600, 5400 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: ...found (800x600, 5400 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: ...found (800x600, 5400 bytes, v3).
bootsplash: status on console 5 changed to on


This appears to be a known problem with kernel 2.6.27.31:
http://lkml.org/lkml/2009/8/27/44